 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| UMX9989APTM DUAL ULTRA LOW MAGNETIC MOMENT FAST DIODES FOR MRI APPLICATIONS RoHS compliant DESCRIPTION KEY FEATURES WWW .Microsemi .C OM The UMX9989AP is the first MRI switching diode module, designed to optimize performance and reduce assembly labor, cost, and polarity errors. There are two principle applications for which the UMX9989AP modules are intended: 1) MRI receiver protection from high RF energy fields, including long RF pulses and RF spike pulses present in most MRI machines. The UMX9989AP acts as a passive protector (limiter) for the MRI receiver's LNA. The diode assembly exhibits extremely low insertion loss, both in the "on" state (high power present) and the "off" state (receiver power present) so the Receiver's Noise Figure is not increased by the protector circuit. 2) Passive switching of surface coil detuning and blocking circuits. In this case, the flow of loop current during transmitter pulse turns on the diodes, without a switch driver. If the UMX9989AP is combined with a PIN diode (UM7201SM) the combination can be used to implement a semi-active detune or block circuit design. The UMX9989AP's turn on the PIN diode (used for higher power switching) during the sinc(x) sidelobes, before the main pulse of the transmitter waveform, sinc(x) = [sin (x)]/x, occurs. The mechanical drawing shows the structure of the diode pair. Manufacture of dual anti-parallel pairs of UMX9989's ensures that the matched pair of diodes can be inserted in a coil with the correct diode polarities and with the minimum parasitic inductance and capacitance, thermal impedance and labor for the coil manufacturer. Ultra low magnetic construction RoHS compliant Matched pairs available Surface mount package. Metallurgical bond Planar passivated chip Non cavity design Thermally matched configuration Low capacitance at 0 V bias Low conductance at 0 V bias Compatible with automatic insertion equipment APPLICATIONS/BENEFITS MR passive receiver protection IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com MR passive blocking circuits MR passive detuning circuits ABSOLUTE MAXIMUM RATINGS AT 25 C (UNLESS OTHERWISE SPECIFIED) Rating Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine wave Storage Temperature Operating Temperature Symbol IFSM T stg T op Value 2 -65 to +150 -65 to +150 Unit A MR passive disable circuits UMX9989APTM UMX9989APTM C C Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 1 UMX9989APTM DUAL ULTRA LOW MAGNETIC MOMENT FAST DIODES FOR MRI APPLICATIONS RoHS compliant ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) WWW .Microsemi .C OM Parameter Forward Voltage (Note 1) Symbol VF Conditions IF = 10 A IF = 1 A VR = 0V, F = 1 MHZ VR = 0 V, F = 64 MHz VR = 0 V, F = 64 MHz VR = 0 V, F = 64 MHz Min Typ. 0.38 1.2 4 4 Max 0.4 1.4 8 8 80 Units V V pF pF uS kOhms Capacitance Conductance Parallel Resistance CT G RP 12 Note: 1 Short duration test pulse used to minimize self - heating effect . ELECTRICAL ELECTRICAL Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 2 UMX9989APTM DUAL ULTRA LOW MAGNETIC MOMENT FAST DIODES FOR MRI APPLICATIONS RoHS compliant WWW .Microsemi .C OM ELECTRICAL ELECTRICAL PRODUCT PRELIMINARY DATA - Information contained in this document is pre-production data, and is proprietary to Microsemi Corp. It may not be modified in any way without the express written consent of Microsemi Corp. Product referred to herein is not guaranteed to achieve preliminary or production status and product specifications, configurations, and availability may change at any time. Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 3 UMX9989APTM DUAL ULTRA LOW MAGNETIC MOMENT FAST DIODES FOR MRI APPLICATIONS RoHS compliant WWW .Microsemi .C OM STYLE "UM9989AP" OUTLINE STYLE "UM9989AP" FOOTPRINT MECHANICAL MECHANICAL NOTES: 1. These dimensions will match the terminals and provide for additional solder fillets at the outboard ends at least as wide as the terminals themselves, assuming accuracy of device placement within .005 inches 2. If the mounting method chosen requires use of an adhesive separate from the solder compound, a round (or square) spot of cement as shown should be centrally located. 3. Dimensions shown are in inches. Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 4 UMX9989APTM DUAL ULTRA LOW MAGNETIC MOMENT FAST DIODES FOR MRI APPLICATIONS RoHS compliant NOTES: WWW .Microsemi .C OM NOTES NOTES Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 5 |
Price & Availability of UMX9989AP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |